StarTech USB-A 3.0 -> SATA 22pin M/F adapter 0.5m fekete

Csomagajánlatok

• Részletek
• Adatok
• Vélemények

Részletek

The USB3S2SAT3CB USB 3.0 to SATA adapter cable lets you connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB port -- the easiest way to upgrade the hard drive in your laptop by adding an external SSD via USB 3.0.  

The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning and data backup applications.

The USB3S2SAT3CB is backed by a StarTech.com 2-year warranty and free lifetime technical support.

 

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing, UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

The StarTech.com Advantage

• Maximum portability with cable-style adapter, and no external power adapter required
• Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported host

Bus Type	USB 3.0
Chipset ID	ASMedia - ASM1051E
Compatible Drive Types (Type and Rate)	SATA
Drive Size	2.5in
Fan(s)	No
Interface	USB 3.0
Number of Drives	1
Performance
Max Drive Capacity	Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate	USB 3.0 - 5 Gbit/s
	SATA III (6 Gbps)
UASP Support	Yes
Connector(s)
Drive Connectors	1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors	1 - USB 3.0 A (9 pin; SuperSpeed) Male
Software
OS Compatibility	OS independent; No software or drivers required
Special Notes / Requirements
Note	Cable will work only with 2.5" SATA drives 3.5"/5.25" drives are not supported
Environmental
Humidity	40%-85%RH
Operating Temperature	0°C to 60°C (32°F to 140°F)
Storage Temperature	-10°C to 70°C (14°F to 158°F)
Physical Characteristics
Product Height	0.4 in [9 mm]
Product Length	19.7 in [500 mm]
Product Weight	1.4 oz [41 g]
Product Width	1.9 in [49 mm]
Packaging Information
Shipping (Package) Weight	2.2 oz [61 g]
What's in the Box
Included in Package	1 - USB 3.0 to SATA 2.5" HDD Adapter Cable
	1 - Instruction Manual

 

Whosting Kft törekszik a weboldalon megtalálható pontos és hiteles információk közlésére. Olykor, ezek tartalmazhatnak téves információkat: a képek tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban, egyes leírások vagy az árak előzetes értesítés nélkül megváltozhatnak a gyártók által, vagy hibákat tartalmazhatnak. A weboldalon található kedvezmények, a készlet erejéig érvényesek.

Adatok

Csatlakozó típus:

SATA, USB-A

Gyártó:

StarTech

Garancia:

2 év

Garancia mód:

Szervizben

MPN:

USB3S2SAT3CB

Vélemények

Legyen Ön az első, aki véleményt ír!

Véleményt írok